Wooden Construction Materials
Posted By on December 20, 2016
If desired, arrange a home rehabilitation spa in the first place need to build a sauna. Construction of a bath – just a godsend for owners of suburban areas. Traditionally, the tree is prepared for a bath at times of winter, it is due to the peculiarities of construction of the tree. Obtained in the low period of the wood is much less amenable to distortion – the formation of by splitting, warping, wood best to have a weak moisture and its geometry remains constant over the construction of a bath. Manufacture of wood log to be better to purchase a factory timber, in order to get a guaranteed quality of interlocking knots compounds, preparation of the final bath log home kit will take much less time, the masters do not need to wield an ax here on site, to hollow out an equity grooves and corner locks for information design.
A log house for a bath natural moisture to pass the process of preparing at least until the autumn, to the extent that it does not happen to the main shrinkage of lumber. In fact means that the shrinkage of the building material of log natural humidity can have a 5 cm to 1 meter. Construction of the bath log home is in a fairly short period of time, because it reduces the assembly – log-baths mimic the process of children's game designer, but requires a minimum adjustment manually. Round timber is prepared by the Design module. When using log bathhouse cylindrical timber , brings an additional low-temperature processing.
In the end, the material gap located in a place specially of technological groove. Round timber has a geometric shape of a cylinder, and a final moisture content should not exceed 15 – 18%. Quality of training logs so high that the walls Inside baths require no interior finish. Professional experts in the planning of baths taken at the expense of the possibility of deformation of the geometry of the material, including in the construction of special bolts and shrink must comply with the process of drying wooden frame. Baths of logs provided maximum performance compared to any construction raw materials. Since ancient times, the log was suitable for manufacturing premises, due to the fact that wood is sturdy and environmentally friendly. Log cabin on 100% natural materials, raw cellulose, which has pores, hence the tree breathes, regulates moisture, provides a microclimate.
Comments