The Brake
Therefore it is necessary work, consisting of two parts – cleaning and lubrication – regarded as one. Check availability bike. This will help you keep a bike in good condition regardless of whether you ride every day on it, or are preparing to cross to terrain. The first three steps in this on the brakes. If you find any defect in any of the parts, until it was eliminated – otreguliruete whether the tension of old ropes or replace them with new ones, replace a brake shoes, or spend any more work – you can not operate a bicycle. And it is clear why: the failure of other systems can be a nuisance, but are not dangerous, what are the brake fault system. Ideally should inspect before the program "Quick grease, but after the" Big cleansing. This will allow verification without getting dirty or dirt, or grease, but do not forget at the end smear test bike.
The next step is to check the check the running gear. It would seem obvious, but do not so easily, especially if there are faults in the steering column. If there are faults in steering column you to "hear" – so upon impact or sudden deceleration of the front brake you hear a distinctive rattle in the steering column. If there is a slight weakening, which is easily detected by Thumb delivered between the frame and fork, then this defect is eliminated by simply tightening the column. The next step – to check the chain of transmission.
Comments